ATV Drag Racer Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
90 Posts
If you are running the V-Force reeds, then I believe the one you want is the '89 year model CR250 intake boot.

If you are not running V-Force reeds, then the '98 year model CR250 intake boot AND the '98 reed cage are good. The '98 intake has a built in stuffer that fits the corresponding cage.


Regards,

Rog
 

·
Registered
Joined
·
61 Posts
Discussion Starter · #6 ·
what about carbs??? im going to run the motor on alky, i was told a 38 or 39mm pwk but i have a chance to buy a 40mm for a good price. the motor is gonna be stock cylinder, 4mm stroker. im not going with lectron because of the price, and i wanna keep this thing looking as original as possible. this will be the first time ive messed with alky so i dont know if a 40mm is gonna be too much. the carb came off of a late 80's kx250 dirtbike. tell me what ya think, thanks.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top