ATV Drag Racer Forums banner

370 Pro-x

7383 Views 29 Replies 9 Participants Last post by  more-torque
3
Here's Danny's 370 today. Sorry about the camera Phone pic.
It's about 1600rpm that is over 70hp, and around 900rpm over 75hp. 77.5 hp and 47.5 tq peaks...
44lectron, CR 250 ignition, our SPI programmable cdi, Shearer drag pipe. The pipe needs some adjusting, but it looks like it will run well.


Rectangle Font Parallel Pattern Slope
See less See more
1 - 20 of 30 Posts
2
QUOTE (more-torque @ May 10 2008, 07:31 PM) index.php?act=findpost&pid=80Here's Danny's 370 today. Sorry about the camera Phone pic.
It's about 1600rpm that is over 70hp, and around 900rpm over 75hp. 77.5 hp and 47.5 tq peaks...
44lectron, CR 250 ignition, our SPI programmable cdi, Shearer drag pipe. The pipe needs some adjusting, but it looks like it will run well.


View attachment 386

Sweet, thanks for the help Nate! Im excited to ride it!! I was ready to call it a day after the first pass at 72hp! LOL
See less See more
QUOTE (blasterman88 @ May 10 2008, 10:36 PM) index.php?act=findpost&pid=83Sweet, thanks for the help Nate! Im excited to ride it!! I was ready to call it a day after the first pass at 72hp! LOL

My Saber is hungry.
QUOTE (Koolguyson @ May 15 2008, 01:48 AM) index.php?act=findpost&pid=173My Saber is hungry.
Those are some sweet #'s. Who did the porting on that??
See less See more
3
QUOTE (blasterman88 @ Oct 28 2008, 08:47 PM) index.php?act=findpost&pid=14186Nate McCoy built the motor, it runs pretty good!

Thse are some sweet numbers for sure.....
So will he work on anyones Pro-X??
See less See more
QUOTE (Fouledout421 @ Oct 29 2008, 12:52 PM) index.php?act=findpost&pid=14253Nate McCoy = More-Torque


Send him a PM

10-4.....
See less See more
Very nice numbers indeed.. Good see a 250 based putting good numbers like that.

Even today they are still hard to beat.
Nate dynoed a 250 based motor yesterday and made almost 97hp! hows that??
QUOTE (blasterman88 @ Oct 29 2008, 04:11 PM) index.php?act=findpost&pid=14291Nate dynoed a 250 based motor yesterday and made almost 97hp! hows that??
would that happen to be the Puma??
Cause its very familiar to the number i heard about
QUOTE (blasterman88 @ Oct 29 2008, 07:05 PM) index.php?act=findpost&pid=14312yes
i really hope mine gets close to that sooner or later
That sound like my 96.7hp Puma that Nate just got through for me
. That was with the clutch slipping. Thanks Nate.
See less See more
QUOTE (matts @ Oct 29 2008, 08:18 PM) index.php?act=findpost&pid=14328That sound like my 96.7hp Puma that Nate just got through for me
. That was with the clutch slipping. Thanks Nate.
i dont suppose you wanna tell what your setup is do you
See less See more
I believe you would want to talk to Nate about that, lol. I don't want to give out any secret info. I haven't even seen it yet. Should have it this weekend. I'll tell you it's a +4mm crank and a big carb
.
See less See more
QUOTE (matts @ Oct 29 2008, 09:34 PM) index.php?act=findpost&pid=14332I believe you would want to talk to Nate about that, lol. I don't want to give out any secret info. I haven't even seen it yet. Should have it this weekend. I'll tell you it's a +4mm crank and a big carb
.
ok if i tell you my crank is bigger will you tell me what size the carb is.lol. and your ignition?
See less See more
QUOTE (blasterman88 @ Oct 30 2008, 01:42 PM) index.php?act=findpost&pid=14378Carb is BIG and the ignition is special! LOL
secret this secret that.lol. about a 48?
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top