ATV Drag Racer Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
Need help with gearing for my 450r, Will be on a 450r with a mostly built stock bore/stroke engine with 22x11x8 10pdl haulers. Still undecided on swinger length, but local sand drags require LOTS of paddles, I want a good setup for these paddles to where it wont pickup unless i sit all the way back and only use 3 gears in 300ft stock is 13/39 i think. Bike will be around 300 wet with 165lb rider.
 

·
Registered
Joined
·
1,740 Posts
remeber the further out the swinger the more its going to want to spin starting out i had a + 6 worked great
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #7 ·
For now I just cant be buying new tires so the 10 pdls are gonna have to do. I'll try a 15t front with stock rear (38?) and throw a +6 on there and see how she does. Not quite ready for cut tranny yet, but eventually. Thanks for the help.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top