ATV Drag Racer Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Hey guys I just put a cub top end on my 7mm. Its got cpi inframes, 38mm pwk's, v force 3 reads, 21cc domes and strait race gas and GP7 oil at 40:1 and the timing is 5 . I have CEL needles 162 mains and 52 pilots. I was told by one guy to run 168 mains and 55 pilots and the clip on the bottom spot and someone else told me 160 mains and 50 pilots and to leave the clip up one and these are bolt really big shops that build lots of cub wat do you guys think Plus Im at sea level

Ps what should I run my timing at.
 

·
Registered
Joined
·
97 Posts
most cub seem to like 50-55 pilot, a decent needle dek, cel maybe range, and 160-165 range.

depends on lot of variables,

im not offering advice cause i had lot of problems put some lectrons on and havent had any issues. so cant complain now.
 

·
Registered
Joined
·
489 Posts
QUOTE (wesw78 @ Jun 9 2008, 06:17 PM) index.php?act=findpost&pid=2324most cub seem to like 50-55 pilot, a decent needle dek, cel maybe range, and 160-165 range.

depends on lot of variables,

im not offering advice cause i had lot of problems put some lectrons on and havent had any issues. so cant complain now.
my 10mill cub liked del needles middle clip with vp c12. 55 pilot 165 main
 
1 - 6 of 6 Posts
Top