ATV Drag Racer Forums banner

Alky injection question

1278 Views 6 Replies 4 Participants Last post by  Jeff B
Where runing the raptor turbo and i was wondering since i have a drag car 496 on alky with injectors on the intake manifold.

Did any of you guy's run a 700 injection on alky????

On my car there's the jet at the inj. and a return pille.

I'm thinking it would be crazy fast!!!

Thanks
1 - 7 of 7 Posts
QUOTE (Portking @ Jul 20 2008, 11:57 AM) index.php?act=findpost&pid=5899Where runing the raptor turbo and i was wondering since i have a drag car 496 on alky with injectors on the intake manifold.

Did any of you guy's run a 700 injection on alky????

On my car there's the jet at the inj. and a return pille.

I'm thinking it would be crazy fast!!!

Thanks

Are you talking about a mecanical injection? they use pills and jets...
fot the 700 you would need to get bigger injectors and a high flow fuel pump witch i would think you already have if its turboed..
QUOTE (GPracerX @ Jul 25 2008, 10:39 AM) index.php?act=findpost&pid=6493Are you talking about a mecanical injection? they use pills and jets...
fot the 700 you would need to get bigger injectors and a high flow fuel pump witch i would think you already have if its turboed..



Got the high flow pump. Where working with the ECU piggy back to add fuel.I have a alky car with fuel jet and return pill thats why i was asking if a electric injector works???. What size injector would you sugest.

Thanks
I'm gonna be trying a 650cc injector soon, the stock one I believe is at 500cc.... for the same reason as well, turbo alcohol Raptor
See less See more
QUOTE (StockRaptor_Tony @ Jul 28 2008, 02:30 AM) index.php?act=findpost&pid=6765I'm gonna be trying a 650cc injector soon, the stock one I believe is at 500cc.... for the same reason as well, turbo alcohol Raptor


hmm for 100hp on alky you will need at least 130lb/hr or 1500cc gas will take a 750cc
See less See more
For the application it would be in non turbo engine. I'm going to get the turbo up and running first.

I can increase the full pressure max at 68psi all that's needed is a starting point for the inj size. The rest i will map with the ECU piggy back.

Thanks.
Anything new on this? I have a injected kfx450 I am thinking about running on alky and any info would be helpful.....
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top