ATV Drag Racer Forums banner

bad a$$ 4 strokes... where they at?

61593 Views 292 Replies 78 Participants Last post by  rickszilla
id like to see some lick 4 -strokes..... i saw a couple of nice raptors on the other thread..

i guess nobody on this forum has a bad yfz... ds... 450r ????

my buddy is almost done with his turbo yfz .. he bought the turbo from finish line racing..
1 - 20 of 293 Posts
I had a pretty quick stock bore yfz450 but got rid of it.
Now i built my girl a stock bore and stroke yfz with a 06 lowerend and 1+ head the chassis is pretty light so we will see how it does.

I am in the process of building me a drag 660r raptor but wont be a while until it is done.

My buddy has a 815cc ds650 and moves out pretty well, and will have some juice on it pretty soon.
my buddy is almost done with his turbo yfz.. i cant wait to see how it turns out ..
Is there such thing as a "Bada$$" 4-choke?Lol j/p
QUOTE (06banshee @ May 28 2008, 10:01 PM) index.php?act=findpost&pid=1365Is there such thing as a "Bada$$" 4-choke?Lol j/p

I guess it depend's on who say's its bad arse.....lol
QUOTE (BBIII @ May 28 2008, 03:17 PM) index.php?act=findpost&pid=1308I had a pretty quick stock bore yfz450 but got rid of it.
Now i built my girl a stock bore and stroke yfz with a 06 lowerend and 1+ head the chassis is pretty light so we will see how it does.

I am in the process of building me a drag 660r raptor but wont be a while until it is done.

My buddy has a 815cc ds650 and moves out pretty well, and will have some juice on it pretty soon.
who did you have do your head on the yfz done by?my buddy had one done by Neils (spelling?).it had the +1 valves,13 to 1 piston,different intake cam and carb bored and tell you what it was a quick sucker.
Wheel Tire Land vehicle Vehicle Automotive tire


This my old raptor 686. It wasnt a drag racing bike just a fast trail bike. list of mods

lonestar +2 a-arms
lonestar +2 axle
tcs suspension front and rear
t-9 baja rims with razrs
tag t2 handlebars
asv levers (not in picture)
blingstar bumber
je pistons
stage 3 webcams
fcr carbs
686cc

im sure im missing some stuff but thats most of it.
See less See more
more pics i found with the fenders cut and asv levers.

Attachments

QUOTE (00tbanshee @ May 30 2008, 12:14 AM) index.php?act=findpost&pid=1439who did you have do your head on the yfz done by?my buddy had one done by Neils (spelling?).it had the +1 valves,13 to 1 piston,different intake cam and carb bored and tell you what it was a quick sucker.
The first yfz i built i had Jeff @ FAST racing port it and it was pretty quick for a stock bore and stroke.

Neils as in Velocity racing?
This need +1 head is done by T-rex my buddy that lives in Texas and with this new setup it should run alot harder than my old yfz i built, but we will see next weekend.
QUOTE (BBIII @ May 30 2008, 03:52 PM) index.php?act=findpost&pid=1498The first yfz i built i had Jeff @ FAST racing port it and it was pretty quick for a stock bore and stroke.

Neils as in Velocity racing?
This need +1 head is done by T-rex my buddy that lives in Texas and with this new setup it should run alot harder than my old yfz i built, but we will see next weekend.
Here is my ole 734 raptor it runs pretty good for a four poke with a fat guy on it.

Attachments

QUOTE (BBIII @ May 30 2008, 03:52 PM) index.php?act=findpost&pid=1498The first yfz i built i had Jeff @ FAST racing port it and it was pretty quick for a stock bore and stroke.

Neils as in Velocity racing?
This need +1 head is done by T-rex my buddy that lives in Texas and with this new setup it should run alot harder than my old yfz i built, but we will see next weekend.
yea neils as in velocity racing.don't know to much about him but know he could make them run.this was back 2 seasons ago.think about the time my buddy getting out of it they was coming out with that 15 to 1 piston think it was.i think neils had apart in the airforce1 bike
QUOTE (Raptor Trent @ May 30 2008, 07:26 PM) index.php?act=findpost&pid=1515Here is my ole 734 raptor it runs pretty good for a four poke with a fat guy on it.
Im still trying to get used to this new site. It is a little different but I'm likein it.
QUOTE (00tbanshee @ May 30 2008, 09:27 PM) index.php?act=findpost&pid=1516yea neils as in velocity racing.don't know to much about him but know he could make them run.this was back 2 seasons ago.think about the time my buddy getting out of it they was coming out with that 15 to 1 piston think it was.i think neils had apart in the airforce1 bike
Ya he had some good work done, if i remeber correctly nil's was having Mixxer port his head, but i am not 100% sure on that.

I got one of the 1st 15-1 pistons that came out and oh boy did it run.

Nils had nothing to do with Airforce one, that was a nmotion build.
Nice Trent....thats a prett bottle you got on the back of it too.
QUOTE (BBIII @ May 30 2008, 07:50 PM) index.php?act=findpost&pid=1522Ya he had some good work done, if i remeber correctly nil's was having Mixxer port his head, but i am not 100% sure on that.

I got one of the 1st 15-1 pistons that came out and oh boy did it run.

Nils had nothing to do with Airforce one, that was a nmotion build.
tells you how much i know about 4strokes.lol.that airforce bike did run good though
Yes Terrys bike did run hard for only being a 480cc bike.
who's nmotion..lol
See less See more
i think someone would have to ask terry on who actually "built" and designed that motor.. or rocky might know?

tims ds is a fast dude now..

steve's raptor is super quick also..

both have a LOT of money in them and after building/ seeing/ contributing the raptor 700 i wouldnt dump money in anything else. $ fo $ they will stand the abuse and produce big numbers as far as HP and tq..

i used to hate the fart canners but those big bore bikes are a LOt of fun.. the ds's and 700's//
1 - 20 of 293 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top