[more-torque]

We have the new DMX 18mm on the Dyno right now. At this point we are just trying started tuning it, but our first full dyno Pass was 157hp, and 92.2 ft lbs of torque. I should have more data, and dyno sheets in the next few days.

 

[06banshee]

Will there be small DMXs available?Like 4mills and 10mills?

 

[s-540]

what is a DMX ? does anyone have pictures?

 

[okbeast]

QUOTE (s-540 @ May 21 2008, 10:18 PM) index.php?act=findpost&pid=758what is a DMX ? does anyone have pictures?

well that'll open a can of worms

that's a ton of torque seems like. The 10mm DM you posted was only making 72 something right? Quite a bit jump compared to the HP, very impressive.

 

[Scot]

X version of the DM "Dominate Male" thats available all the way up to 85mm bore but still has the stock banshee center to center.

Calvin could have named bddm "big daddy dominate male"

 

[koolguyson]

QUOTE (Bo_Didly @ May 21 2008, 09:19 PM) index.php?act=findpost&pid=769X version of the DM "Dominate Male" thats available all the way up to 85mm bore but still has the stock banshee center to center.

Calvin could have named bddm "big daddy dominate male"

I think I am a little partial to "alpha male"

 

[REDLINE]

QUOTE (Koolguyson @ May 22 2008, 09:03 PM) index.php?act=findpost&pid=839I think I am a little partial to "alpha male"

I've heard that about you Sonny.........

 

[koolguyson]

QUOTE (REDLINE @ May 22 2008, 09:41 PM) index.php?act=findpost&pid=849I've heard that about you Sonny.........

That rules you out...lol

 

[more-torque]

104ft lbs of torque on the low rpm pipe, and hit a 159.2hp, but much happier at 156ish hp...Still much testing to do...

 

[Kawiking]

wow..any vid ?

 

[Guest]

One of my sponsors has a 16mm DMX and dyno numbers are. 164hp with 92# of torque.

Also a 10mm DMX with 144hp with 80#

Both running billet carbs on alky..

Billet carbs will add up to 18hp.

 

[06banshee]

QUOTE (Planet Asphalt @ May 28 2008, 04:50 PM) index.php?act=findpost&pid=1338One of my sponsors has a 16mm DMX and dyno numbers are. 164hp with 92# of torque.

Also a 10mm DMX with 144hp with 80#

Both running billet carbs on alky..

Billet carbs will add up to 18hp.


What the hell are billet carbs and where can I get em?!!!!!

 

[BLK]

QUOTE (06banshee @ May 28 2008, 05:56 PM) index.php?act=findpost&pid=1339What the hell are billet carbs and where can I get em?!!!!!

I think White Knuckle has them.

 

[more-torque]

QUOTE (Planet Asphalt @ May 28 2008, 05:50 PM) index.php?act=findpost&pid=1338One of my sponsors has a 16mm DMX and dyno numbers are. 164hp with 92# of torque.

Also a 10mm DMX with 144hp with 80#

Both running billet carbs on alky..

Billet carbs will add up to 18hp.
It might be helpful for evaluation purpose for you to clarify what dyno the 16mm made the 164hp on...lol

 

[more-torque]

QUOTE (06banshee @ May 28 2008, 05:56 PM) index.php?act=findpost&pid=1339What are billet carbs and where can I get em?!!!!!
If the billet carbs make more hp more than 50 lectrons, I would be surprised.

 

[06banshee]

QUOTE (1700camaro @ May 28 2008, 05:01 PM) index.php?act=findpost&pid=1341I think White Knuckle has them.

Will they Add 18HP over Carbs their Size or over stockers?Has it been Dyno tested over regular carbs?

 

[BLK]

QUOTE (06banshee @ May 28 2008, 06:08 PM) index.php?act=findpost&pid=1345Will they Add 18HP over Carbs their Size or over stockers?Has it been Dyno tested over regular carbs?

I'm sure it's all hype, a typical sales pitch.

 

[06banshee]

I really wanna Know.I have some money saved up and was looking at buying something to try and squeze as much power out of my lil ole cub.Never heard of them but if they do perform that much better I will sell my pwks and get these.Lets see what some other guys have to say before I start making phone calls to Nate or White Knuckle

 

[more-torque]

QUOTE (06banshee @ May 28 2008, 06:19 PM) index.php?act=findpost&pid=1347I really wanna Know.I have some money saved up and was looking at buying something to try and squeze as much power out of my lil ole cub.Never heard of them but if they do perform that much better I will sell my pwks and get these.Lets see what some other guys have to say before I start making phone calls to Nate or White Knuckle
Yes, I am sure that they will make 18 more hp than stock banshee carbs on a 700+cc motor.

 

[koolguyson]

He may be referring to CPC carbs