ATV Drag Racer Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
Any of you guys running shift lights or have an idea of shift point RPM? Also would like to know how quickly you are making the 1-2 gear shift. Right out of the hole, prior to 60', just beyond 60'? This is all based off of a 6 speed banshee. Typically running 16/38 or 17/40 gearing also with 19 or 22" in. tires.
 

·
Registered
Joined
·
230 Posts
QUOTE (banshee217 @ Aug 29 2008, 01:00 PM) index.php?act=findpost&pid=9612Any of you guys running shift lights or have an idea of shift point RPM? Also would like to know how quickly you are making the 1-2 gear shift. Right out of the hole, prior to 60', just beyond 60'? This is all based off of a 6 speed banshee. Typically running 16/38 or 17/40 gearing also with 19 or 22" in. tires.

We use a shift light & have it set at 10,000 rpm. The 1-2 shift takes place around the 60' mark, but I can't tell you if it's before, at or after. Maybe Tedder can chime in some information.
 

·
Registered
Joined
·
47 Posts
If I leave in first with that same gearing and running 19" mt slicks, I am definately shifting into second before the 60' mark. If I leave in second, which has been working way better, I pull third gear either right at or just after the 60' mark. This is on a 350 with 6 speed tranny and clutch shifting, so may not be apples to apples. Gearing is 16/39.
 
1 - 3 of 3 Posts
Top