[jtraptor660]

So i smoked my clutch on my shee. Just looking for some assistance with putting in a new clutch. never done it before. i also bought a lock up would need help installing that as well. if anybody knows where i can get a free pic download with description or if any member knows how and doesnt mind leaving a detailed description that would be great.

 

[dunejumper]

Drain your oil or turn it on its side so the oil won't come out. take the cover off, remove the 5 bolts holding the five springs down, remove the hub (pressure plate) you see the springs went threw, leave the hub and the basket in remove the fibers and steels, put new clutch in start with a fiber then go steel fiber steel fiber and so on, you will end with a fiber, put you pressure plate back on, springs, lock out on top of springs use your new bolts that came with the lock out and tighten everything, put the cover back on and your good to go. Just pay attention as you take it apart if your really worried snap a bunch of pics as you go so you can look back to make sure its right.

 

[KaosBanshee44]

Make sure when you go back with the pressure plate that the three arrows on the plate line up with the corners of the basket. If you have it on wrong the plate won't but up against the fiber and that's no bueno. The lockup is easy to install just put your springs on and start with two screws get them started and just screw in 1 turn at a time until it's butted up with the plate then install the last remaining screws.

 

[bigboybanshee]

http://forums.atvdragracers.com/index.php?showtopic=1261

 

[KaosBanshee44]

QUOTE (bigboybanshee @ Oct 1 2008, 12:48 PM) index.php?act=findpost&pid=12149http://forums.atvdragracers.com/index.php?showtopic=1261
Hmmmm that's interesting

 

[jtraptor660]

QUOTE (KaosBanshee44 @ Oct 1 2008, 11:41 AM) index.php?act=findpost&pid=12151Hmmmm that's interesting


yes it is interesting. i forgot about that one. ive posted it on a couple of other websites at the same time. sorry not trying to over post.

 

[banshee332]

QUOTE (jtraptor660 @ Oct 1 2008, 03:30 PM) index.php?act=findpost&pid=12162yes it is interesting. i forgot about that one. ive posted it on a couple of other websites at the same time. sorry not trying to over post.

dont forget with a new clutch your going to have to adjust it.

 

[jtraptor660]

thanks for all the info its all been great. i just need to break it down now. im just waiting on my lock up and cover to get in.