Joined
·
824 Posts
Tim did a awesome job on some bars i wanted made. The bars on the bike as of now are just one straight bar with a 3 inch rise but hit the plastics BAD when i turn them all the way left or right. So we came up with something that would work out for me. I don't think he was gonna be able to post them up over here since his computer has been acting up so i'll go ahead and do it.
Its hard to see in the pics....but the top center is 1" tubing with a taper cut with the 7/8's bars tig welded into it for design.
Its hard to see in the pics....but the top center is 1" tubing with a taper cut with the 7/8's bars tig welded into it for design.




