ATV Drag Racer Forums banner

Mikuni TM alky jetting

6K views 15 replies 8 participants last post by  BBIII 
QUOTE (bansh-eman @ Jul 8 2008, 08:48 PM) index.php?act=findpost&pid=4808he doesnt like mikunis , he's pwk kinda guy

i just did a little researched and you should be running
dumps.........needles.................clip
118 6fj41[002-713] mid.....or you could run this
116 6dpa[002-341] one clip above the fattest position and dont go above mid clip[i wouldnt]
[sudco #]
you can order the needles from sudco but the dumps and mains youre going to have to oder from knt or lynn
www.sudco.com......800-998-3529...........the needles for the 116 are a little smaller and allow for more fuel therefor running smaller dumps....the 118 needle is a little bigger and you get the point.......do not run anything below 116 or you will burn your motor....by the way myself and tony have always run the 118 combo on our 421 with no problems......by the way i dont know what done to the seat for it to work with the pump since this carbs are gravaty feed
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top