ATV Drag Racer Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
623 Posts
Discussion Starter · #1 ·
Few pics of how my nitrous install went. The stainless tankw e builts mounted up front for race fuel as enrichment fuel for the nitrous system. Battery box is stainless and mounts right between the filters with a bolt threw the top strut mount. Has the micro swith built into the billet throttle assembly and added a billet push button to activate it only when i want instead of full throttle all the time. Heat shrink all connections etc . Came out pretty good clean and neat once i got the bike all together last night. Be time to run it threw a few heat cycle tonight and test and tune tomorrow before the races.

Also if you dont have to have a fuel pump or enrichment tank the install could really be made easy and clean.

Thanks every who answered questions on the nitrous when i needed some answers









[url="http://img199.imageshack.us/i/1250208782.jpg/"]





[url="http://g.imageshack.us/img441/1250208768.jpg/1/"]





 

·
Registered
Joined
·
1,534 Posts
if the reeds are not stainless you are going to freeze and break the carbon v force reeds.. you can try spraying stright through the transfers or spacing the foggers farther from the reeds..

i have heard of them snapping off.. and causing big ooops parts flying out..
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top