ATV Drag Racer Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
2,469 Posts
Yes but you cannot run a 5/8" spindle on a stock spindle, the tapper on the stock spindle is different from a 5/8" spindle.
Almost all spindle mounts have removeable bearings so you would just need the correct bearing to put them on your stock spindle.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top