ATV Drag Racer Forums banner

1 - 20 of 31 Posts

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #1
how many people run 4 mill cubs.... what kinf of oof's are u running on ur cubs ??
 

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #3
What kind ??? I was thinkin sb shears or rdz 's ........ What do u all run ??
 

·
Registered
Joined
·
692 Posts
I use BB shearer on my 4mil.. Best thing to do is ask your builder which pipe his motor likes the best.. If he dont know then I'd wonder why? lol
 

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #5
jeff said he likes the sb shears for his motor....
travis.. bigboy runs rdz/grr on his F.A.S.T. cubby... i believe jt is runnin bb shear ( ?)

my motor is suppose to be set up close to their 4 mils.. just on race gas ( for now)
 

·
Registered
Joined
·
1,061 Posts
QUOTE (kawiking @ May 18 2008, 08:47 AM) index.php?act=findpost&pid=525jeff said he likes the sb shears for his motor....
travis.. bigboy runs rdz/grr on his F.A.S.T. cubby... i believe jt is runnin bb shear ( ?)

my motor is suppose to be set up close to their 4 mils.. just on race gas ( for now)
bike ran the same times at the track with the big bore shearers as it did with the small bore rdz's.
granted I was using a bar with the big bores so I was learning how to ride with a bar.

I have a bad habit of lifting every time the front end comes up! to many years of riding with out one!!
 

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #7
jt.. got any vid of u runnin with the bar ??
 

·
Registered
Joined
·
240 Posts
I'm running RDZ sb on my 421 (from Jeff, cleanup port only) and Shearer sb on my 392. You can't go wrong either way.
 

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #10
jeff said he likes the sb pipes.. id like to try a set of rdz's.. i have a set of cpi oof's but dont want to use them..
they are pretty beat up>>
 

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #12
well i know travis(bigboy) runs grr and i think ran rdz's on his 4 mill from jeff... and jt has ran diffrent pipes on his 4 f.a.s.t. mill

i was just tryin to find out what most people run.... and what set ups they run them on.

my motors goin to be close to how jt, and travis's motor is set up..but im on gas...
 

·
Premium Member
Joined
·
3,418 Posts
If I'm not mistaken, Travis always ran gas...because he sprayed too. I think he might of went alky for a while, but went back to gas to tune for NOS, he's more comfortable with that.

JT uses Big Bore Shearers on his 4 mil.

I talked to Jeff the other day, he currently uses inframe big bore Shearers on his 10 mil, but he said he's gonna try small bore for giggles....
 

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #14
id like to see what else runs good , because im not a big fan of shears qaulity.... i know they run good.. but im not spendin $600 on a set of pipes that the chromes goin to fall of , and ive seen some not so good welds to....

i know they run good.. but so do other pipes that look better and arent goin to look like crap in acouple of months.

i was even thinkin of just orderin a set of them bare
 

·
Registered
Joined
·
1,227 Posts
Ive never had a problem with my shearers chrome falling off,,,get the show chrome and you wont have a problem as far as the welds if you plan on running out of frames on the dunes you better have a good rubber insulater between your pegs and pipes or it aint gonna matter what brand of pipes you got they will break!been there done that.
 

·
Registered
Joined
·
1,227 Posts
[quote name='dajogejr' date='May 23 2008, 07:48 AM' post='866']
If I'm not mistaken, Travis always ran gas...
where is ole travis?? he get on tha site yet?
 

·
Premium Member
Joined
·
3,418 Posts
Well...Shannon...I got news for ya bud!

I have show chrome shearers, got them August of last year from Matt's "new Chromer" and it's flaking at the head pipe...just before the bend. I clean them and never dull them after any race or weekend of riding. Just a hose and soapy water, no power wash, etc.

First race I had them, the seam split. To his credit, I got them back quickly....very pleased.

I took them off two days ago to borrow to a friend, wiping them down...noticed the chrome starting to peel and flake off.

I love the shearer pipe, but I'd get raw next time and have my chromer do them up....

I asked Travis to join...haven't heard from him. But I haven't him post a lot lately on any of the forums..
Maybe he's lucky...he's actually riding and staying away from the keyboard....LOL....

Can't we all be so lucky??
 

·
Registered
Joined
·
1,003,688 Posts
Discussion Starter #19
i hadnt talked to travis since the week of ps.. ???
 
1 - 20 of 31 Posts
Top