ATV Drag Racer Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
can some one tell me if my plug color is ok... it looks black in the pic but its a dark brown color, and the top of the porcelan is a caramel color, is it rich or wat
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #3 ·
alky
 

·
Premium Member
Joined
·
1,953 Posts
I'm no alky guru at all but you do not go by color on alky. You go by the burned plating on the flat base of the threaded part of the plug. You need to start with new plugs/plug. If it's really wet of course it would be rich. If it's burned 1/4 of the way around the base it's slightly rich. You want it to be burned 180 degrees or basically burned from "9 oclock" to "3 oclock" with the ground strap at the top being "12 oclock". If it's burned all the way around and probably very dry it's lean.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top