ATV Drag Racer Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter · #1 ·
what do you guys run for jetting for one of these bikes buddy has one and been a while since i played with a mukuni carb and there jetting and needles.

i think its got a 6fj6 needle or soemthing like that.

has an aaen pipe i think thats the brand. and basically just that.
 

·
Premium Member
Joined
·
1,953 Posts
With the stock roundslide 34mm carb and a pip a 260,270,280 needle one clip richer(clip down) than the middle clip. WE also always cut the ruber snorkel back to the second rib and cutout the front of the airbox and got rid of the two little round rubber snorkels in the front of the airbox and ran a K/N filter.

If you have a 38mm mikuni flatslide and a pipe and filter and modded airbox about a 350-380
With a 39mm Keihin Carb a 172 main
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top