ATV Drag Racer Forums banner

Rear brake extended up to the front lever

3K views 9 replies 8 participants last post by  camatv 
i just ordered one off of ebay pretty cheap. will cut any length you need and put whatever fittings you want in whatever orientation you need them; and there are a few different colors to choose from. 7-9 feet may be a little long, but i dont know. for my banshee, 75" will leave me a little room to grow if i need a longer swinger. have a +6 right now.



here ya go:



http://cgi.ebay.com/ebaymotors/BANS...rcycles_Parts_Accessories&hash=item19bd28a8a1
 
I thought about doing the same thing but on the 1/8 mile would you be able to put a enough pressure to stop it at such high speeds?


I got mine on a while ago and have had a chance to try it out. Stops just as good as it coming from the foot pedal. I just used the stock front brake master cyl since I dont run front brakes.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top