ATV Drag Racer Forums banner

1 - 10 of 10 Posts
P

·
Guest
Joined
·
0 Posts
Discussion Starter #1
What are you guys using for a clutch, primary gears and transmission setup in you dragger??

How many clutch fibers?

1-4,1-5 or 1-6??

2:36,2:52,2:68,2:86(stock)??

Do you race in the sand or on asphalt??

Thanks
 

·
Registered
Joined
·
489 Posts
QUOTE (Planet Asphalt @ Oct 6 2008, 03:53 PM) index.php?act=findpost&pid=12582What are you guys using for a clutch, primary gears and transmission setup in you dragger??

How many clutch fibers?

1-4,1-5 or 1-6??

2:36,2:52,2:68,2:86(stock)??

Do you race in the sand or on asphalt??

Thanks

ron 1-5, 2:68's, r6 fibers with a 7 plate.
 

·
Registered
Joined
·
1,003,688 Posts
1-5 wcr dunable
stock gear
f.a.s.t clutch .. slingshot lockup
 

·
Registered
Joined
·
507 Posts
500ft (or so) Sand Drags
1-5 Duneable
Stock gears
Hinson 8 plate FZR fibers
 
P

·
Guest
Joined
·
0 Posts
Discussion Starter #5
1/8mile 1/4 mile asphalt drags.

Motor 710 DM 20mm stroker. 165hp at the crank on gas.

Primary's are 2:36.

The tranny is a WCR stock gears 1-5.

Billet basket with stock inner hub & stock pressure plate. 7 fibers. stock springs.
with one stage lockup.
 

·
Registered
Joined
·
43 Posts
Had a 1-6 til it broke first weekend of September. Now the transmission is in the shop for repair, going on 3 weeks.
Went to the ole reliable, back-up trans.

K+T ported 4mill on pump gas. Horsepower unknown (hahahahaha)
Rudy Kurtz override 1-4 manuel 5,6
Hinson basket, stock inner hub and pressure plate
EBC fibers
Stock steels
Stock springs
Straight Cut Primaries stock ratio
Single stage lock-up
1/8 and 1/4 mile asphalt drag racing
 

·
Registered
Joined
·
1,061 Posts
300 ft sand
2-5 wcr tranny
stock ratio straight cut gears
15-44 gearing.
hinson basket,
stock hub and pressure plate
FAST Racing clutch kit.
6 hd springs
direct drive lockup.

FAST 4mill cub on alky.
 

·
Registered
Joined
·
793 Posts
300ft sand drags
2-5 over ride
grr lock up
vito's drag clutch kit
HD springs
15-46 gearing
stock hub and pressure plate
hinson basket
 

·
Registered
Joined
·
1,534 Posts
dune drags 400-500+ft

1-5 st joee fat guy cut override
hinson straight cut springloaded basket/ gear set (only one that would hold up)
fzr clutch kit
3 toomey springs
rappy steel's
stoc hub and pressure plate

bolt+nut on locker

535 cheeta 10 mill

15 38 gear
 
1 - 10 of 10 Posts
Top